5s
+1
Submission successful!
Place of Origin:
Deyang, Sichuan, China
Brand Name:
DSSD
Certification:
ISO 9001:2008, CE
Model Number:
Turgo 100kW
Contact Us
The Turgo unit sits between Pelton and Francis in application: it handles medium to high head with a larger flow than a Pelton of the same runner diameter, so it fits hill stream sites with a head of 30 to 300 m and a modest flow. The split bucket runner is less sensitive to silt than a Pelton wheel.
| Item | Specification |
|---|---|
| Turbine type | Turgo, horizontal shaft |
| Rated output | 100 kW |
| Water head | 30 - 300 m |
| Rated flow | 0.05 - 0.35 m3/s |
| Runner diameter | 400 - 800 mm |
| Runner material | Stainless steel casting |
| Generator voltage | 400V |
| Frequency | 50Hz / 60Hz |
| Excitation | Brushless with AVR |
| Control mode | Off grid with ballast load or grid tied |
| Efficiency | 85% - 90% |
Turgo units are a practical choice for community micro hydro in hilly areas: the runner tolerates silt, the layout is compact, and the ballast load controller allows island operation without a battery bank. The 100 kW frame can be paralleled for larger village schemes.
The unit is protected with rust preventive coating, fixed on a steel skid or packed in a seaworthy wooden case. Electrical parts are packed in moisture proof bags. Site drawings, test reports and the operation manual are supplied with the shipment.
Deyang Dongsen Hydropower Equipment Co., Ltd. is based in Deyang, Sichuan, China and has supplied turbine generator sets and EPC services for more than 500 hydropower stations since 2007, covering Francis, Kaplan, Tubular, Pelton and Turgo units from 100 kW to 50 MW under an ISO 9001 quality system.
Send your inquiry directly to us
