1000kw Francis Water Turbine Runner
1. Brief Introduction
Francis Turbine, also called mixed flow turbine and variable pressure turbine, is widely used in hydropower plants with low, middle and high water head ranging from 25m onwards to 550m commonly 30m to 300m. When the water flow through the turbine wheel, it enters to radial, axial flow, so it is also called the radial axial flow turbine. The water flow from the surrounding radial inflow runner, then approximate axial flow runner, runner by the crown, under the ring and the blade.
2. Product Paramenters
| Water Head | 25m-300m |
| Runner Diameters | 0.45m-5m |
| Power Range | 100KW to 70MW |
| Frequency | 50HZ/60HZ |
| Generator Voltage | 400V, 800V, 6300V, 10500V |
| Layout pattern | Horizontal or Vertical |
| Material(blades) | Stainless Steel ZG0Cr13Ni4Mo |
| Excitation | Brushless or Static excitation system |
| Generator Insulation | F/F |
| Lifespan | 30~50 years |
| Manufacturer | Deyang Dongsen Hydropower Equipment Co., Ltd. |
3. Application
4. Main Products
(1) Axial flow type turbine generators series.
(2) Turgo turbine generators series,e.g. vertical type horizontal type.
(3) Tubular turbine generators series ,e.g. Bulb type and shaft extension type.
(4) Francis turbine generators series.
Send enquiry to the seller
