Pico Hydro Turbine/Tubular Turbine Generator/Mini Hydro Power Generator
1. Brief Introduction
The tubular turbine requires less space than other turbines, a saving in civil costs is realized due to a smaller powerhouse and shallow requirements for the draft tube, which is equipped with adjustable wicket gates and adjustable runner blades.
Pit type tubular turbine is a new hi-tech product. It is well suitable for hydropower plants with water head ranging from 2 m to 10 m and unit capacity below 15MW. It has the following particular advantages: Its efficiency is higher than shaft-extension type tubular units and axial flow units; its cost is lower than axial flow units and bulb tubular units, and it is convenient to operate and maintain. Pit type tubular turbine is divided into fixed blade type (GD) and moveable blade type (GZ).
2. Product Paramenters
|Brushless or Static Excitation System
|Deyang Dongsen Hydropower Equipment Co.,Ltd
1) Design and manufacture of hydro power generator with voltage 400V, 3.3KV, 6.3KV, or 10.5KV AC three phase
2) More than 20years of industry experience, install commissioning more than 100 equipment each year
3) Power generation equipment has been provided for more than 500 power stations at home and abroad
1) Payment terms
L/C, 30% T/T in advance.
2) Delivery period
Normally 6 months after confirmation of orders.
We will use wooden box and plastic film to protect the products.
4) What Kind of hydroelectric generator should I choose?
This belongs to customized products. We could design products according to your requirement. All of our products are strictly designed and manufactured under ISO9001 quality management system and TUV, BV.
Please can you send me below parameters, so our engineers could support your project?
Where is the plant? How many kw each unit? How many units?
1. Design head: ___m
2. Design flow: ___m³/s
3. Frequency: 50Hz or 60Hz
4. M.a.s.l: ___m
5. Power factor COSφ:
6. Generator output voltage: __V
7. On-grid or Off-grid type? (On-grid type voltage: ____Kv)
8. Basic situation about the project and your company introduction.
Send enquiry to the supplier