Single beam crane
Maintenance of single beam crane
1. Before the original factory of the lifting equipment, it is necessary to keep a record of the true identity. Safety inspection and maintenance before installation of equipment: check the integrity of the key organizational characteristics of the machine and equipment, check the visible defects of the key steel frame structure and connections, and the axle pins and anchor bolts, and check the anti-corrosion status of the machine and equipment surface , Generate records, and show installation suggestions.
2. Lifting equipment, machinery and equipment are maintained by full-time personnel. After the delivery of machinery and equipment, the usual maintenance should be undertaken by the actual operator of the machinery and equipment or the staff of the application enterprise, and the installation and maintenance company shall be responsible for the supervision and inspection of the usual maintenance. The usual maintenance theme and thought section is summarized as "cross line work method": cleaning, tightening, lubricating, adjusting, and anti-corrosion. 10-30 minutes before and at the end of every day, inspect each part and location of the machinery and equipment to see if everything is normal, lubricate the oil according to the regulations, pay attention to whether the noise of the machinery and equipment is normal, and do a good job in the cleaning and shift work In order to exceed the appearance of the machinery and equipment to be clean and tidy, and to operate all normal purposes, the usual maintenance records and shift records must be made into fixed reports and kept as files.
|Contact Person :||Jasmine Tan|