450-1000RPM Rated Speed Francis Water Turbine Generator 300KW-20MW for Your Benefit

450-1000RPM Rated Speed Francis Water Turbine Generator 300KW-20MW for Your Benefit

Product Description:

The Francis Turbine Generator is a type of hydroelectric turbine generator which is widely used in power plants for electricity generation. It is named after its inventor, James Bicheno Francis, an American engineer. The turbine is designed to convert the energy of water into mechanical energy, which in turn drives the generator to produce electricity.

The Francis Turbine Generator is recognized for its high efficiency, reliable performance, and versatility. It can adapt to different water flow rates and is suitable for both high and low-head sites. With its robust construction and advanced technology, it has become one of the most popular choices for hydropower generation.

• Rated Speed: The Francis Turbine Generator has a rated speed of 450-1000RPM (revolutions per minute). This allows it to operate efficiently at various water flow rates and produce a consistent output of electricity.
• Rated Voltage: The generator is available in multiple rated voltage options - 400V, 800V, 6.3kV, and 10kV. This makes it suitable for different power transmission and distribution systems.
• Installation Mode: The Francis Turbine Generator can be installed in both vertical and horizontal orientations, depending on the site conditions and requirements. This provides flexibility in installation and operation.
• Rated Frequency: The generator is designed to operate at a rated frequency of 50Hz or 60Hz, which is the standard frequency for power systems in most countries.
• Rated Power: The Francis Turbine Generator has a wide range of rated power options, from 300KW to 20MW. This allows it to cater to different power demands and can be used in both small and large scale power plants.

The Francis Turbine Generator is primarily used in hydroelectric power plants to generate electricity from the potential energy of water. It is also suitable for use in pumped storage power plants, which use excess energy during off-peak hours to pump water back to a higher reservoir, thereby storing energy for later use.

In addition to power generation, the Francis Turbine Generator can also be used for irrigation, flood control, and water supply purposes. Its versatility and efficiency make it an ideal choice for various water management projects.

The Francis Turbine Generator, also known as the Francis Hydraulic Turbine Generator or Francis Steam Turbine Generator, is a reliable and efficient solution for electricity generation from water. With its high performance, flexibility, and wide range of applications, it is a valuable asset in the field of hydropower. Whether it is for commercial or industrial purposes, the Francis Turbine Generator is a trusted and proven choice for sustainable energy production.

Features:

• Product Name: Francis Turbine Generator
• Rated Efficiency: 90%-96%
• Rated Voltage: 400V, 800V, 6.3kV, 10kV
• Runner Material: Stainless Steel
• Application: Power Plant
• Rated Speed: 450-1000RPM
• Product Type: Francis Steam Turbine Generator, Francis Hydraulic Turbine Generator, Francis Water Turbine Generator

Technical Parameters:

Applications:

Are you looking for a reliable, efficient, and cost-effective turbine generator for your power plant? Look no further, because Dongsen-DSSD's Francis Turbine Generator is the solution you need.

Our Francis Turbine Generator, with the model number Francis HL-WJ, is designed and manufactured in Deyang, China, by our team of experts. With years of experience and advanced technology, we guarantee a high-quality product that meets international standards.

Our Francis Turbine Generator is certified by ISO, CE, and TUV, ensuring its reliability, efficiency, and safety. With a minimum order quantity of 1 set, our product is suitable for both large-scale and small-scale power plants. And with a competitive price of $40,000, it is a cost-effective option for your power generation needs.

Brand Name: Dongsen-DSSD

Model Number: Francis HL-WJ

Place of Origin: Deyang, China

Certification: ISO, CE, TUV

Minimum Order Quantity: 1 set

Price: $40,000

Packaging Details: Export packing (wooden cases+plastic film)

Delivery Time: 150 Days

Payment Terms: T/T

Supply Ability: 500 sets per year

Our Francis Turbine Generator is specifically designed for use in power plants. It is suitable for various types of power plants, including hydroelectric, thermal, and nuclear power plants.

Our Francis Turbine Generator is built with high-quality materials and advanced technology, ensuring its reliable performance. It is designed to withstand various operating conditions and can operate continuously for long periods without any issues.

The Francis Turbine Generator is designed to convert the energy of falling water into mechanical energy, which is then converted into electrical energy. With a rated water head of 20m-300m and a rated speed of 450-1000RPM, our product can generate a large amount of electricity efficiently.

At Dongsen-DSSD, we understand that every power plant has unique requirements. That's why our Francis Turbine Generator can be customized according to your specific needs. From the size and type of turbine to the output capacity, we can tailor our product to meet your requirements.

Our Francis Turbine Generator is designed for easy maintenance and has a long lifespan. With regular maintenance and proper care, our product can last for many years, reducing the need for frequent replacements.

The Francis Turbine Generator is an environmentally friendly option for power generation. It does not produce harmful emissions and uses renewable energy sources, making it a sustainable choice for your power plant.

Type: Francis Turbine Generator

Rated Water Head: 20m-300m

Rated Speed: 450-1000RPM

Rated Frequency: 50Hz/60Hz

With our Dongsen-DSSD Francis Turbine Generator, you can expect high-quality, reliable, and efficient performance for your power plant. Contact us today to place your order and experience the power of our Francis Turbine Generator.

Customization:

As a leading supplier of Francis Hydraulic Turbine Generator in Deyang, China, Dongsen-DSSD offers high-quality customized services to meet the specific needs of our clients. Our Francis HL-WJ Model is designed to provide efficient and reliable power generation for various applications in power plants.

• Brand Name: Dongsen-DSSD
• Model Number: Francis HL-WJ
• Place of Origin: Deyang, China
• Certification: ISO, CE, TUV
• Minimum Order Quantity: 1 set
• Price: $40,000
• Packaging Details: Export packing (wooden cases+plastic film)
• Delivery Time: 150 Days
• Payment Terms: T/T
• Supply Ability: 500 per year
• Application: Power Plant
• Rated Speed: 450-1000RPM
• Rated Frequency: 50Hz/ 60Hz
• Runner Material: Stainless Steel
• Rated Voltage: 400V 800V 6.3kV 10kV

At Dongsen-DSSD, we understand that every client has unique requirements and we are committed to providing customized services to meet those needs. Our team of experts will work closely with you to design and manufacture a Francis Turbine Generator that fits your specific application and budget. We offer:

• Flexible payment terms to suit your financial needs.
• Fast delivery time of 150 days to ensure your project stays on schedule.
• Reliable supply ability of 500 sets per year to meet your long-term power generation needs.
• Professional technical support throughout the entire process.

Our Francis Turbine Generator is made with the highest quality stainless steel runner to ensure durability and longevity. It is also designed to operate at a rated speed of 450-1000RPM and rated frequency of 50Hz/ 60Hz. Additionally, we offer multiple rated voltage options including 400V, 800V, 6.3kV, and 10kV to accommodate different power grid requirements.

Choose Dongsen-DSSD for your Francis Turbine Generator needs and experience our excellent customized services, high-quality products, and reliable technical support. Contact us today to learn more about our Francis HL-WJ Model and how it can benefit your power plant application.

Packing and Shipping:

Francis Turbine Generator is usually packaged with great care to ensure its safe delivery to the customers. The packaging process involves the following steps:

• The turbine generator is first wrapped in a layer of protective material such as bubble wrap or foam to prevent any damage during transportation.
• The wrapped generator is then placed in a sturdy cardboard box, which is sealed with packaging tape to secure its contents.
• The box is labeled with the product name, specifications, and handling instructions for the shipping company to follow.
• For international shipments, the package is usually placed in a wooden crate for added protection.

We work with reliable shipping companies to ensure prompt and safe delivery of the Francis Turbine Generator to our customers. The shipping process includes the following steps:

• The packaged generator is loaded onto a truck or a cargo vessel depending on the destination.
• Our team closely monitors the shipment to ensure its timely arrival at the designated location.
• Upon arrival, the package is carefully unpacked and inspected for any damages.
• Any necessary installation or assembly instructions are included in the package for the convenience of our customers.

We take great pride in our packaging and shipping process to ensure that our customers receive their Francis Turbine Generator in perfect condition and ready for use.