Water Turbine Generator/Francis Water Turbine/Mini Hydro Turbine
1. Brief Introduction
Francis turbines may be designed for a wide range of heads and flows. This, along with their high efficiency, has made them the most widely used turbine in the world. In contrast to the Pelton turbine, the Francis turbine operates at its best completely filled with water at all times. The turbine and the outlet channel may be placed lower than the lake or sea level outside, reducing the tendency for cavitation.
In addition to electrical production, they may also be used for pumped storage, where a reservoir is filled by the turbine (acting as a pump) driven by the generator acting as a large electrical motor during periods of low power demand, and then reversed and used to generate power during peak demand. These pump storage reservoirs act as large energy storage sources to store "excess" electrical energy in the form of water in elevated reservoirs.
2. Product Paramenters
||100KW to 70MW
||400V, 800V, 6300V, 10500V
||Horizontal or Vertical
||Stainless Steel ZG0Cr13Ni4Mo
||Brushless or Static excitation system
||Deyang Dongsen Hydropower Equipment Co., Ltd.
3. Our advantages
1) Provide complete proposal for hydro power plant from water to wire
2) Abundant foreign power plant project implementation experience
3) Design and manufacture of hydro power generator with voltage 400V, 3.3KV, 6.3KV, or 10.5KV AC three phase
1) Payment terms
L/C, 30% T/T in advance. or T/T
2) Delivery period
Normally 6-8 months after confirmation of orders.
We will use wooden box and plastic film to protect the products.